litigation and disputes resolution

Calculating losses from a contract breach

by

reviewed by

Malcolm Burrows

A breach of contract can broadly be described as the failure to comply with any term of an agreement; some examples include a refusal to perform, incomplete performance, delay or unlawful termination.  Once it has been determined that a breach of contract has in fact occurred, the next question is how to determine the resulting loss and whether it can be recovered from the responsible party.  Whilst there is no hard and fast rule when attempting to quantify losses, there are certain principles which form part of the process of assessing damages caused by a breach of contract.

General rule regarding quantification of damage

It is generally accepted that the rule for assessment of damages for breach of contract is set out in Commonwealth v Amann Aviation Pty Ltd (1991) 174 CLR 64 at 116 by Deane J, which provides:

The general principle governing the assessment of compensatory damages in both contract and tort is that the plaintiff should receive the monetary sum which, so far as money can, represents fair and adequate compensation for the loss or injury sustained by reason of the defendant’s wrongful conduct.

Damages in contract generally attempt to place a plaintiff in the position which would have occupied had the breach not occurred (Monarch SS Co Ltd v A/B Karlshamns Oljeifabriker [1949] AC 196 at 220).  An alternative view is where there is been a breach of contract, then the plaintiff should have been placed in the position as if the contract had been performed (Robinson v Harman (1848) 1 Ex 850 at 855).

Where a plaintiff claims to have suffered loss or damage by reason of a defendant’s breach, the onus of proving the extent of the loss falls on the plaintiff.  It must be established:

  • that the loss or damage was caused by the defendants breach; and
  • that the loss or damage was not too remote.

The test for remoteness – Hadley v Baxendale

The well-known rule regarding remoteness of damage in the context of contract is that stated by Alderson B in Hadley v Baxendale (1854) 9 Ex. 341 [156 E.R. 145]. 16:

Where two parties have made a contract which one of them has broken, the damages which the other party ought to receive in respect of such breach of contract should be such as may fairly and reasonably be considered either arising naturally, ie, according to the usual course of things, from such breach of contract itself, or such as may reasonably be supposed to have been in the contemplation of both parties, at the time they made the contract, as the probable result of the breach of it.”

General damages vs special damages

General damages cover the loss which naturally occurred as a result of the breach of contract.  A plaintiff can claim special damages, being damages of an exceptional nature, where the defendant has prior knowledge of the likelihood that the loss would be suffered (Stroms Bruks Aktie Bloga v Hutchinson [1905] AC 515 at 525).

Reliance damage

It’s not uncommon for a plaintiff to spend money in the anticipation of performance of a contract.  In McRae v Commonwealth Disposals Commission [1951] 79 the plaintiff was awarded a contract by the defendant to salvage an oil tanker.  The plaintiff sent a vessel to the tanker’s alleged location and the tanker did not exist.  The courts determined that the appropriate damages was for costs by the plaintiff in searching for the tanker.

Combined claims

Although the plaintiff may claim multiple heads of damage, the court will ultimately decide the basis for assessing damages and the plaintiff cannot elect the bases for assessment (Cf Stocznia Gdynia A v Gearbulk Holdings Ltd [2010] 1 QB 27).  The Court will never award more that which exceeds the loss actually suffered so care must be taken to ensure the plaintiff does not recover the same loss twice over.  This was discussed in Cullinane v British ‘Rema’ Manufacturing Co Ltd [1954] 1 QB 292 whereby the plaintiff purchased machinery for the purpose of producing dry clay.  The machinery ultimately was not able to produce dry clay at the rate which was promised so the plaintiff sought to be compensated.  Initially the plaintiff had claimed a refund of the money spent purchasing the equipment and also a loss of profit for the difference between the rate that clay was promised to be produced and the rate that is actually produced.   The court rejected the profit component because the plaintiff could only have earned the profit if they had incurred the capital expenditure.

Takeaways

If you believe a contract has been breached and you are trying to quantify your losses, you should consider:

  • your position if the contract had been performed, compared to your position currently;
  • whether the breach caused you to lose other contracts or opportunities, and whether the other party were aware of these opportunities; and
  • whether you attempted to mitigate your loss.

Links and further references

Cases

Commonwealth v Amann Aviation Pty Ltd (1991) 174 CLR 64

Cullinane v British ‘Rema’ Manufacturing Co Ltd [1954] 1 QB 292

Hadley v Baxendale (1854) 9 Ex. 341 [156 E.R. 145]. 16

Monarch SS Co Ltd v A/B Karlshamns Oljeifabriker [1949] AC 196 at 220

Stocznia Gdynia A v Gearbulk Holdings Ltd [2010] 1 QB 27

Stroms Bruks Aktie Bloga v Hutchinson [1905] AC 515 at 525

Further information about breach of contract

If you need advice on how to ensure that your quantification of losses for breach of contract are reasonable or if you need to defend them, contact us for a confidential and obligation-free discussion:


Related insights about breach of contract

  • Business Lawyer

    Business Lawyer

    Business Lawyer, commercial and contracts and advisory lawyer, 4-10 years PAE, and $ negotiable performance based, depending on experience.

    Read more …

  • When a thumbs up emoji means accepting an offer

    When a thumbs up emoji means accepting an offer

    In a time where communication increasingly takes place through text messages and social media platforms, the legal recognition of non-traditional expressions, such as emojis, presents a potential evolution of the doctrine of acceptance in contract law.  The 2023 Canadian decision by the Saskatchewan Court of King’s Bench (Court) in South West Terminal Ltd v Achter…

    Read more …

  • What is an indemnity clause?

    What is an indemnity clause?

    The word indemnity, in its’ legal context, is defined as “legal protection against liabilities arising from one’s actions.”  An indemnity clause therefore, represents the contractual embodiment of this definition, serving as a formal mechanism which protects one party from the from the actions or inactions of another.  In effect, it enables parties to allocate risk…

    Read more …

  • QITC IT contracts framework an introduction

    QITC IT contracts framework an introduction

    In August 2017, the Queensland Government introduced the Queensland Information Technology Contracting (QITC).  The QITC framework replaces the Government Information Technology Contracting (GITC) framework.  It was designed for the purpose of guiding all Queensland Government Information and Communications Technology (ICT) contracts.

    Read more …

  • How to read a commercial contract

    How to read a commercial contract

    A commercial contract (Commercial Contract) is a legally binding agreement between two (2) or more parties that contains the terms and conditions for a mutual exchange of value, such as goods or services for financial compensation.  This article aims to assist the reader on how to understand the contents of such a document.

    Read more …

  • Arbitration clauses in international contracts

    Arbitration clauses in international contracts

    Arbitration is a private process where parties to a commercial contract agree (Arbitration Agreement) to let an arbitrator[1] (Arbitrator) make a binding decision on a dispute between them, without recourse to national Courts.  The Arbitrator receives evidence, hears arguments and applies relevant law to reach a binding decision, called an award (Award).  The Arbitrator’s decision…

    Read more …

  • Tortious contract interference – injunctive relief

    Tortious contract interference – injunctive relief

    The wrongful or “tortious” interference with a contract occurs when a third party intentionally causes a contracting party to commit a breach of contract.  The third party will be liable if they intentionally induced or disrupted a party’s ability to perform the terms of a binding contract.  Remedies for tortious interference are available to ensure…

    Read more …

  • Are contract recitals legally binding?

    Are contract recitals legally binding?

    Recitals, also known as the “preamble” or “details” clauses (Recitals) are introductory statements at the start of a contract that provide context, background or reasons for the terms and conditions that follow.  They have been historically used by the Courts to aid in the interpretation of ambiguous terms and are capable of including essential provisions…

    Read more …

  • Unfair contract terms, penalties & ACCC v Employsure 2020

    Unfair contract terms, penalties & ACCC v Employsure 2020

    When deciding whether a contractual term is unfair, a Court will likely consider if the term would cause a significant unbalance, if it is not reasonably necessary to protect legitimate interests, or if it would cause detriment.  Careful consideration should be given to the inclusion of clauses of this nature in standard form contracts, especially…

    Read more …


Posted

in

Send this to a friend